JIYAN H18‑2C Pneumatic Dual Zero Point Clamp – 2-in-1 Compact
An integrated dual zero point clamping system with two clamps on a single 380×150 mm base, ultra‑low 48 mm profile, ±0.005 mm repeatability, and 110 kN total pull‑down force. Perfect for large pallets, 5‑axis machines, automated cells, and long workpieces requiring maximum rigidity.
We typically respond within 24 hours.
| Parameter | Value |
|---|---|
| Model | H18‑2C |
| Type | Dual zero point clamp (2-in-1 integrated) |
| Dimensions (L×W×H) | 380 × 150 × 48 mm (14.96″ × 5.91″ × 1.89″) |
| Repeat positioning accuracy | ±0.005 mm (±0.0002″) |
| Max. operating pressure (air) | 1.2 MPa (174 psi) |
| Pull‑down force (per clamp) | 55 kN (12,364 lbf) |
| Clamping force (per clamp) | 17 kN (3,822 lbf) |
| Total pull‑down force (both clamps) | 110 kN (24,728 lbf) |
| Actuation | Pneumatic (single or dual port) |
2-in-1 integrated design – two zero point clamps built into one long baseplate
Ultra‑low profile – only 48 mm height, saves valuable Z‑axis clearance on CNC machines
High repeatability – ±0.005 mm (0.0002″) per clamp for precise pallet registration
Long span – 380 mm center distance accommodates large pallets and fixture plates
Total pull‑down force – 110 kN (24,728 lbf) combined for heavy workpiece security
High max. air pressure – 1.2 MPa (174 psi) for demanding production environments
Rigid steel body – hardened and precision‑ground for high‑cycle durability
Low height, wide footprint – 380×150 mm base resists tipping and torque
Large CNC pallet systems – 380mm span supports oversize fixture plates without flex
5‑axis machining centers – ultra‑low 48mm height maximizes Z‑axis travel for tall parts
Automated work cells – dual registration points ensure robotic pallet loading accuracy
Horizontal machining centers (HMCs) – mount directly on machine pallets for quick changeover
Long workpiece clamping – two widely spaced clamps prevent part tilting on extended parts
High‑speed machining – 110 kN total pull‑down force eliminates vibration in aggressive cuts
True 2‑in‑1 integration – no alignment or spacing errors between separate single clamps
Lowest profile available – 48mm height keeps pallet surface close to machine table
Pre‑set clamp spacing – 380mm center distance eliminates measurement and setup time
Precision ground reference surfaces – each unit verified for flatness and parallelism
Pneumatic only – no hydraulic power unit needed, simplifies installation
Ready for automation – consistent zero‑point locking for robot‑tended cells
Custom hole patterns – available upon request for specific machine tables