From milling to EDM to inspection, the datum must survive every hand-off without loss.
What goes wrong in this sector when workholding is not specified from the process up.
The reference established on the mill must still be exact when the block moves to the spark machine.
Mold blocks are large and stiff-clamping them badly causes chatter and poor surface finish.
Most tooling is unique, so fixtures must adapt fast without a new design each time.
Each challenge above maps to a JIYAN product direction — proven in daily production.
Provides a stable, repeatable reference plane that travels with the block through every operation.
L-PlateCarries the datum from milling to EDM to CMM with no re-indication between machines.
Zero-Point BaseAdapt quickly to one-off tooling so a new mold does not mean a new fixture design.
Combination Fixtures
The block is located on a zero-point base from the first operation. It is moved machine-to-machine on that same base, so the reference never changes.
Combination fixtures and modular L-plates cover a wide range of block sizes without a dedicated design per job.
Yes — the zero-point interface is machine-agnostic, so the same located block feeds milling, sinking EDM, wire EDM and the CMM.
Send us your drawing and process constraints. Our engineers return a fixture direction and quote within 24 hours.
Request a Quote