Automotive lines live on repeatability and uptime — fixtures must swap fast and hold tolerance shift after shift.
What goes wrong in this sector when workholding is not specified from the process up.
Manual loading drifts part-to-part; the fixture has to absorb that variance and still repeat.
Every minute a line stops to swap tooling is lost throughput on a high-volume program.
The same machining cell must serve several part numbers without a full re-fixturing.
Each challenge above maps to a JIYAN product direction — proven in daily production.
Locks a complete fixture in under 30 seconds with ±0.002 mm repeatability — changeover becomes a non-event.
Zero-Point Clamping SystemStandardize the base tooling so new part numbers drop onto existing components instead of a new design.
Modular FixturesLoad one station while the other is cutting, eliminating idle time at the machine.
Pneumatic Dual-Station
A trained operator swaps a fixture in 10–30 seconds. Because the datum is built into the base, no re-indication is needed — the line is back to cutting almost immediately.
Yes. Modular bases accept different top tooling per part number, and the zero-point interface keeps every variant located to the same reference.
Our zero-point and pneumatic systems are designed for pallet and robot interfaces, so manual cells can be upgraded to automation without changing the locating principle.
Send us your drawing and process constraints. Our engineers return a fixture direction and quote within 24 hours.
Request a Quote