Precision Milling Vises Engineered for Repeatable Accuracy
JIYAN builds precision milling vises for shops that measure success in tenths. From low-profile self-centering vises for thin-wall parts to extra-heavy designs for aggressive roughing, every CNC milling vise is machined, heat-treated, ground and CMM-inspected in-house — so the datum you indicate is the datum you keep. Choose a milling machine vise by part size, clamp force and automation level below.
CNC milling vises by application
Every model is a real, shipped product. Click through for specs, jaw options and CAD.
Small Precision Self-Centering Vise
Aluminum soft jaw for delicate small parts and electronics.
View product
Standard Self-Centering Vise
General-purpose soft-jaw vise for everyday milling setups.
View product
Pick the right CNC milling vise
By part size
Small delicate parts → low-profile and aluminum-jaw self-centering vises. Large stiff workpieces → heavy-duty and flange-type bodies with hard jaws.
By clamp force
Finish milling needs gentle, even force. Heavy roughing needs boosted clamp — our pneumatic-hydraulic vise delivers the hold without deforming the part.
By automation
Pneumatic and zero-point ready vises drop onto pallets and robot cells, so a manual setup today upgrades to lights-out tomorrow without changing the locating principle.
Related workholding
Pair your milling vise with the system that fits the job.
CNC milling vise questions
What is the difference between a precision milling vise and a standard vise?
A precision milling vise is built and inspected to hold tight repeatability — typically ±0.005 mm centering — across thousands of cycles. Jaw seats, guideways and the base are ground, not cast-finish, so the part returns to the same position every time you close the vise.
Which milling vise should I use for thin-wall parts?
Use a low-profile self-centering vise with soft or aluminum jaws. The low jaw keeps the part clear of the cutter, and self-centering spreads clamp force symmetrically so thin walls don't deflect or mark.
Can JIYAN milling vises handle 5-axis machining?
Yes. Low-profile self-centering and zero-point-mounted vises sit low on the table and clear the toolpath, letting you reach four or five faces in one setup. Pair them with a zero-point base for fast changeover.
Do you offer pneumatic and automated milling vises?
Yes. Pneumatic self-centering vises and zero-point pallets are built for robot-loaded and lights-out cells, with a clamp-confirm interlock wired into the CNC.
How fast can I get a quote for a milling vise?
Send your part drawing and process constraints. Our engineers return a fixture direction and quote, typically within 24 hours.
Engineer your milling setup
Send us your drawing and process constraints — fixture direction and quote within 24 hours.
Request a Quote